Gen2VDR Forum -> Festplatte wird nicht mehr gemounted

Hilfe

Suche

Mitglieder

· Foren Regeln

Willkommen Gast ( Einloggen | Registrieren )

Bestätigungs E Mail erneut senden

Gen2VDR Forum -> Gen2VDR V5+ -> Installation/Konfiguration

Festplatte wird nicht mehr gemounted, ...obwohl sie im System noch auftaucht

Thema abonnieren | Thema versenden | Thema drucken

Kickaha	Geschrieben am: Dienstag, 26.Oktober 2021, 00:54 Uhr
Professional Gruppe: Professionals Beiträge: 366 Mitgliedsnummer.: 2030 Mitglied seit: 2007-05-25	Moin ihr Alle... meine Videoplatte (WDC) wird von einen auf den anderen Tag nicht mehr gemounted, obwohl sie während des Bootens noch erkannt wird, wenn ich das richtig erkenne. Hatte sie auch bereits an einen anderen SATA Anschluss gesteckt, Kabel getauscht und die Vibrationen beim Booten/Anlaufen spürt man auch. Soll es das jetzt wirklich mit meinen 3 TB Aufnahmen gewesen sein?! :o Wäre jemand so nett sich die Logs mal anzuschauen? Vielen Dank, Kickaha angehängte Datei ( Anzahl der Downloads: 2 ) g2v_log_10251334.tar.xz

MegaV0lt

Geschrieben am: Dienstag, 26.Oktober 2021, 07:35 Uhr

Professional

Gruppe: G2V3+User
Beiträge: 889
Mitgliedsnummer.: 544
Mitglied seit: 2005-06-01

In dmesg steht wiederholt:

CODE

[Mo Okt 25 13:30:24 2021] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[Mo Okt 25 13:30:24 2021] ata3.00: BMDMA stat 0x25
[Mo Okt 25 13:30:24 2021] ata3.00: failed command: READ DMA
[Mo Okt 25 13:30:24 2021] ata3.00: cmd c8/00:38:40:08:00/00:00:00:00:00/e0 tag 0 dma 28672 in
res 51/40:27:48:08:00/00:00:00:00:00/e0 Emask 0x9 (media error)
[Mo Okt 25 13:30:24 2021] ata3.00: status: { DRDY ERR }
[Mo Okt 25 13:30:24 2021] ata3.00: error: { UNC }
[Mo Okt 25 13:30:24 2021] ata3.00: configured for UDMA/133
[Mo Okt 25 13:30:24 2021] sd 2:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[Mo Okt 25 13:30:24 2021] sd 2:0:0:0: [sdb] tag#0 Sense Key : 0x3 [current] [descriptor]
[Mo Okt 25 13:30:24 2021] sd 2:0:0:0: [sdb] tag#0 ASC=0x11 ASCQ=0x4
[Mo Okt 25 13:30:24 2021] sd 2:0:0:0: [sdb] tag#0 CDB: opcode=0x88 88 00 00 00 00 00 00 00 08 40 00 00 00 38 00 00
[Mo Okt 25 13:30:24 2021] blk_update_request: I/O error, dev sdb, sector 2120
[Mo Okt 25 13:30:24 2021] ata3: EH complete

Das sieht eher schlecht aus. Eventuell mal an einem anderen PC testen oder in ein Gehäuse einbauen. vielleicht. Sieht aber für mich nach Hardware aus...

Kenner mich aber auch nicht mit solchen Meldungen aus

HelAu	Geschrieben am: Dienstag, 26.Oktober 2021, 08:04 Uhr
Scheffe Gruppe: Admin Beiträge: 11285 Mitgliedsnummer.: 2 Mitglied seit: 2003-04-25	Das sieht eher schlecht für die Platte aus. Kannst Du noch die SMART Daten der Platte auslesen ? smartctl -H /dev/sdb

Kickaha

Geschrieben am: Dienstag, 26.Oktober 2021, 09:37 Uhr

Professional

Gruppe: Professionals
Beiträge: 366
Mitgliedsnummer.: 2030
Mitglied seit: 2007-05-25

CODE

VDR-Server ~ # smartctl -H /dev/sdb
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.1.2-gentoo] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

VDR-Server ~ #

Scheint ok zu sein...

MegaV0lt

Geschrieben am: Dienstag, 26.Oktober 2021, 14:23 Uhr

Professional

Gruppe: G2V3+User
Beiträge: 889
Mitgliedsnummer.: 544
Mitglied seit: 2005-06-01

Und was sagt

CODE

smartctl -a /dev/sdb

MegaV0lt	Geschrieben am: Dienstag, 26.Oktober 2021, 14:30 Uhr
Professional Gruppe: G2V3+User Beiträge: 889 Mitgliedsnummer.: 544 Mitglied seit: 2005-06-01	Vielleicht kann man noch Daten retten mit irgendwelchen Tools wie zum Beispiel https://www.diskinternals.com/linux-recovery/

Kickaha

Geschrieben am: Dienstag, 26.Oktober 2021, 16:40 Uhr

Professional

Gruppe: Professionals
Beiträge: 366
Mitgliedsnummer.: 2030
Mitglied seit: 2007-05-25

QUOTE (MegaV0lt @ Dienstag, 26.Oktober 2021, 15:23 Uhr)

Und was sagt

CODE

smartctl -a /dev/sdb

Das hier...

CODE

VDR-Server ~ # smartctl -a /dev/sdb
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.1.2-gentoo] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Western Digital AV-GP (AF)
Device Model: WDC WD30EURS-63SPKY0
Serial Number: WD-WMC1T0776082
LU WWN Device Id: 5 0014ee 058c73cdd
Firmware Version: 80.00A80
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Oct 26 17:33:40 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (40860) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off supp ort.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 410) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70b5) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 231
3 Spin_Up_Time 0x0027 176 174 021 Pre-fail Always - 6175
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2910
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 059 059 000 Old_age Always - 30436
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2910
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 183
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2726
194 Temperature_Celsius 0x0022 125 099 000 Old_age Always - 25
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0

SMART Error Log Version: 1
ATA Error Count: 1304 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1304 occurred at disk power-on lifetime: 30436 hours (1268 days + 4 hours)
When the command that caused the error occurred, the device was active or idle .

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 48 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000848 = 2120

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 48 08 00 e0 08 00:00:43.673 READ DMA
c8 00 08 28 09 00 e0 08 00:00:43.673 READ DMA
c8 00 08 38 08 00 e0 08 00:00:43.673 READ DMA
c8 00 08 20 09 00 e0 08 00:00:43.673 READ DMA
c8 00 08 30 08 00 e0 08 00:00:43.673 READ DMA

Error 1303 occurred at disk power-on lifetime: 30436 hours (1268 days + 4 hours)
When the command that caused the error occurred, the device was active or idle .

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 48 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000848 = 2120

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 48 08 00 e0 08 00:00:40.931 READ DMA
ec 00 00 00 00 00 a0 08 00:00:40.922 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 00:00:40.922 SET FEATURES [Set transfer mode]

Error 1302 occurred at disk power-on lifetime: 30436 hours (1268 days + 4 hours)
When the command that caused the error occurred, the device was active or idle .

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 48 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000848 = 2120

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 48 08 00 e0 08 00:00:35.493 READ DMA
ec 00 00 00 00 00 a0 08 00:00:35.484 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 00:00:35.484 SET FEATURES [Set transfer mode]

Error 1301 occurred at disk power-on lifetime: 30436 hours (1268 days + 4 hours)
When the command that caused the error occurred, the device was active or idle .

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 48 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000848 = 2120

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 48 08 00 e0 08 00:00:32.779 READ DMA
ec 00 00 00 00 00 a0 08 00:00:32.770 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 00:00:32.763 SET FEATURES [Set transfer mode]

Error 1300 occurred at disk power-on lifetime: 30436 hours (1268 days + 4 hours)
When the command that caused the error occurred, the device was active or idle .

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 48 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000848 = 2120

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 48 08 00 e0 08 00:00:30.046 READ DMA
ec 00 00 00 00 00 a0 08 00:00:30.037 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 00:00:30.031 SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

VDR-Server ~ #

MegaV0lt

Geschrieben am: Mittwoch, 27.Oktober 2021, 06:50 Uhr

Professional

Gruppe: G2V3+User
Beiträge: 889
Mitgliedsnummer.: 544
Mitglied seit: 2005-06-01

Der defekte Sector ist wohl an einer "blöden" Stelle. So dass das Dateisystem korrupt ist.

Keine Ahnung wie man das beheben kann. Du musst wohl verschiedene Tools probieren.

Kannst auch versuchen mit fsck was zu erreichen: https://techviewleo.com/repairing-ext-and-x...stems-on-linux/

Aber die Gefahr besteht, dass es auch schwieriger wird später Daten zu retten...

Auf meiner WD30... ist auch ein "Pending Sector. Zum Glück (noch) ohne Auswirkungen

CODE

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Green
Device Model: WDC WD30EZRX-00SPEB0
Serial Number: WD-WCC4E5ZU9V0V
LU WWN Device Id: 5 0014ee 2b7ed5719
Firmware Version: 80.00A80
User Capacity: 3.000.592.982.016 bytes [3,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Oct 26 09:47:40 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (40320) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 404) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 649
3 Spin_Up_Time 0x0027 173 171 021 Pre-fail Always - 8350
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3498
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 9542
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3498
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 19
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 8784
194 Temperature_Celsius 0x0022 127 114 000 Old_age Always - 25
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 68

Kickaha	Geschrieben am: Dienstag, 02.November 2021, 00:05 Uhr
Professional Gruppe: Professionals Beiträge: 366 Mitgliedsnummer.: 2030 Mitglied seit: 2007-05-25	Zum Glück ließ sich der Superblock mit fsck wieder reparieren. Videoplatte wird wieder gemounted. Werde sie aber wahrscheinlich trotzdem mal sicherheitshalber gegen eine neue tauschen... Vielen Dank, Kickaha

Thema wird von 1 Benutzer(n) gelesen (1 Gäste und 0 Anonyme Benutzer)

0 Mitglieder:

« älteres Thema | Installation/Konfiguration | neueres Thema »